トイ クワッド に嵌った。：SPC MAKER SPC 80A 80mm Micro Brushless FPV Racing Drone - BNF - WITH FUTABA RECEIVER COLORMIX
SPC MAKER SPC 80A 80mm Micro Brushless FPV Racing Drone - BNF - WITH FUTABA RECEIVER COLORMIX
https://www.gearbest.com/brushless-fpv-racer/pp_760156.html?wid=21
到着したらやること、写真とりつつ、確認、ばらして、半田、ワイヤリングの確認。
どやら、こいつ地雷品の様子。Lipo 容量と、バッテリー抜き７５ｇからすると、
25～30g は、ダイエットしないと、行けないのかな？
プロペラ５葉なのも、重たいから？
2S-450mA 35C / 70C :
SPC 80A : 75.0g /102.0g , Lipo 2S-500mA 30C : 27.0g、こいつは重さが一番の問題ですね。
Armor 67 : 41.3g / 63.0g , Lipo 2S-400mA 30C : 21.7g
Aurora 68: 47.5g / 69.2g , Lipo 2S-400mA 30C : 21.7gとすると、
SPC 80A - Armor67 ：39g
SPC 80A - Aurora68 ：32.8g
’
重すぎなら、↓に載せ替えても良いでしょうし、Aurora68 フレームでも、行けないかな？
先ずは、到着したら、重さ計って、ばらして、フレーム、カメラ、FC&ESC の重量計測かなぁ
ユーチューブの動画を見ていると、Lipoの放電能力が追い付いていない感じです。
⇒30C を、35C / 45C / 50C / 60C / 65C / 70Cやらに変えるか？？
TATTU の 2S は在庫が払底しているか、サイズが合わないか。
90mm Frame Kit - PURPLE 、24.0g
https://www.gearbest.com/racing-frame/pp_923887.html?wid=21
注文：Jan 07, 2018
出荷：Jan 08, 2018
到着：Jan 13, 2018
Kypom K6 7.4V 450mAh 35C/70C、あんまり考えていませんでしたが、重たいですね。
１号：31.62g
２号：31.29g
３号：31.30g
Makerfire Armor 67 付属 7.4V 400mAh 30C、２機分
１号：21.6g
２号：
SPC MAKER SPC 80A 付属 7.4V 500mAh 30C ×２本
１号：
２号：
ZOP 7.4V 1300mAh 20C ×３本、送信機用途で価格優先購入、5gも違うｗ
１号：57.09g
２号：62.08g
３号：60.73g
21.6g に対抗できるのは、22.0g で
Original FuriBee 7.4V 400mAh 35C 2S Lithium-ion Battery - YELLOW
https://www.gearbest.com/multi-rotor-parts/pp_590449.html?
23g弱で、
Eachine 2S 7.4V 400mAh 30C Lipo Battery for Aurora 68 RC Drone FPV Racing
https://www.banggood.com/Eachine-Aurora-68-Spare-Part-2S-7_4V-400mAh-30C-Lipo-Battery-p-1137422.html?rmmds=search&cur_warehouse=CN
Frame ：90mm Frame Kit
Reciver ：Banggood の格安品
FC ： 2S F3 , Flight controller size: 20 x 20mm, 16 x 16mm, 15 x 15mm
ESC ： 2S DSHOT 300 / 600 or FCにESC込みの奴
MOTOR ：SA1103 8000KV、2S/3S、テストで、1S で回るかやってみよう
Propeller：大量保有の、1535 でやってみて、ダメなら、2030 / 2035 で
Camera ：無し or AIO
Makerfire Armor 67 が、Jan 06,2018 出荷で、11日には到着しそう
上手くすれば、
SPC MAKER SPC 80A も、12日、13日には、到着か？
Gearbest は、可能な限り、Priority Line を選択しましょう。
EAGLEPOWER SA1103 8000KV Motor - 4PCS COLORMIX
https://www.gearbest.com/motor/pp_1199429.html?wid=21
EAGLEPOWER SA1103 Lite 8000KV Motor - 4PCS COLORMIX
https://www.gearbest.com/motor/pp_1199431.html?wid=21
SA1103 8000KV の在庫が無くて、SA1103 Lite 8000KV に、
SA1103 8000KV ：Jan 19.2018 以後の出荷
⇒Aliexpress でよければ、同価格帯のモーターは、
OCDAY BR1103 10000KV Brushless Motor Red for 50 80 100 Quadcopter Racing Drone
OCDAY RC Motor 4pcs 1102 BR1102 8000KV 1-3S Brushless Motor for 50-90mm Micro FPV Racing Drone Quadcopter
GoolRC Original RC Drone Motor 4pcs 1104 8700KV 2S Brushless Motor CW CCW for 80 90 100 Mini Micro FPV RC Racing Quadcopters
GoolRC 4pcs 1103 10000KV 2S Brushless Motor CW CCW for 80 90 100 Micro FPV Racing Quadcopter RC Motor In Airplanes Drone Parts
4pcs/lot 1104 7500KV 2-3S Brushless Motor Engine for iX2 90mm Q90 Mini FPV Racer Racing Drone Spare Parts Accessories
http://www.spcmaker.com/spc-80a-80mm-brushless-fpv-racing-drone-74v-purple-version-bnf-dsm2-receiver-frsky-receiver-futaba-receiver-flysky-receiver-four-options_p0016.html
Description
Description:
Brand name: SPC Maker
Product model: SPC 80A
Wheelbase: 80mm
Size: 116.5*116.5*55mm
Weight: 75g (without battery)
Flight weight: 102g(Include battery)
Motor: SPC Maker 1104 7500KV brushless motor
ESC: Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 50mm 4-blades propeller
Receiver: Receiver: Frsky/DSMX/Flysky/Futaba(optional)
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Flight controller: OSDOminibus F3 flight controller integrated with OSD module
OSD: Betaflight OSD
Firmware of flight controller: Betaflight_3.1.0_OMNIBUS
Flight time: 4-5minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 7.4V 500mah 30C lipo battery
Flight controller parameters:
Ominibus F3 flight controller integrated with OSD module.
1.Powered by MPU6000 sensor for quick response to acceleration, integrated with 5V/1A BEC and OSD module (This is 6DOF version, no barometer and compass).
(1) Designed for small size FPV quads with a frame smaller than 280mm, especially ideal for quadcopters smaller than 130mm to exhibits its advantages in small dimensions and multiple functions.
(2) It provides all the functions of F3 6DOF version, but weighs only 8 grams. The size is only 27*27mm. Mounting hole size is 20mm (2.5mm hole).
(3) Designed for quadcopter with LC filter. It supports CF and BF firmware (Omnibus F3)
(4) STM32F3CCT6 microprocessor, 256K memory, MPU6000 sensor, SPI port, faster processing speed.
(5) Supports 2-4S LiPo input.
(6) Built-in 5V 1A BEC.
(7) Supports popular receivers such as SBus, PPM, DSMX.
(8) Buzzer, programmable LED, voltage monitoring, HLHeli ESC.
2.4 in 1 BLheli_s ESC：
Specifications:
Input voltage: 2-4S LiPo and 2-4S HV LiPo
BEC Output: Not available
Constant current of a single ESC unit: 10A
Maximum current: 15A 5 second.
Dimensions: 27*27mm (main board)
31*31.5mm (including soldering pads and extruded part)
Weight: 6.3g
Firmware: BLHeli_s
Supports D-Shot, Oneshot, rotation directions.
Processor: SILABS EFM8BB21F16G
MOS FET: TPN2R703NL
Driver: new generation 3 in I MOS
Specification of Mini F3 flight controller tower:
Weight: 8g
Supported frames: smaller than 280mm
Constant current: 10A*4 (maximum current: 15A*4, 5s)
Camera parameters:
Frequency band: 5362-5945MH
Channel: 48
Modulation type: FM
Select channel: switch
Channel display: CH1-CH8 channel display with 8 LEDs, and A-F frequency group display with 6 LEDs
Transmit power: 13±1dBm
Frequency control: PLL
All harmonic: Max-50 dBm
Frequency stability: ±100KHz(Typ.)
Frequency precision: ±200KHz (Typ.)
Channel disk failure: 1dB
Antenna port: 50 Ω
Input format: NTSC / PAL
SENSOR: PAL: 720 × 540/NESC: 640 × 480 1/4 "
LENS ANGEL: H: 120 ° / V: 100 °
Baseband interface: P1, 27 * 2
Energy consumption: 200-215MA@5V DCIN
Supply voltage: 2.9-5, 5V
Operating temperature:-10℃ ~ + 60℃
Profile dimension: 14, 5 mm × 12, 2 mm + 14, 5 mm × 12 mm
Compatible:
1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D8 mode),and XJT (D8 Mode),DJT DFT DHT Transmitter.
3.Flysky Receiver Support FS-I6FS-I6X.FS-I6S.FS-TM8.FS-TM10.FS-I10 and other second-generation AFHDS 2A protocol remote control
4.Futaba Receiver Support TM7,TM8, TM10, TM14 T6EX-2.4G,7C-2.4G,T8FG,T10CG ,T12FG.T14SG.
Receiver Setup and Binding Methods
Quads with DSM Compatible Receivers
Binding method for Spektrum radios:
1.Push and hold gold button on top of flight controller.
2.Plug in battery.
3.Release button, light will flash quickly.
4.Hold radio away from machine.
5.Put radio in bind mode.
You are done!
Quads with FrSky Receivers
Binding methods for FrSky radios:
1.Select the D8 mode in X9D radio, and hold binding button of receiver at the time of powering it on. The LED should stay in solid. Then select “BIND” in radio. Binding is successful if the LED light of receiver goes off. Release binding button and power off receiver to exit binding mode. Receiver is ready to use after powered on.
2.For DJT and DFT modules, hold the button on module and power on radio, and the module is set in binding mode. Press and hold the binding button on receiver then power it on. Binding is completed if LED light goes off. Release binding button and restart receiver, and the system is ready for use.
3.For XJT module please select D8 mode by using the dip switch, and follow the above binding procedures.
Enable PPM output:
Short the solder pads of PPM on receiver board to enable PPM output. This can be used for flight controllers, wireless simulators, and wireless trainer radios.
Enable s.Bus mode:
Short the solder pads of s.Bus on receiver board to enable s.Bus output.
Failsafe setup:
Failsafe is assigned to channel 3 only, and cannot be defined by users. No matter what mix setup is used, please make sure throttle is assigned to channel 3.
Quads with FlySky Receivers
Binding method for FlySky radios:
Support radios with the second generation protocol (AFHDS 2A).
1.Enter the binding mode in the radio.
2.Hold the binding button on receiver, and power it on. Rapid flash of LED indicates the receiver is in binding mode. If binding is successful, the LED light will change to slow flash.
3.Exit binding mode of the radio. The LED light on receiver should become solid, indicating completion of binding.
Enable s.Bus mode:
Output modes can be switched in lieu of normal communication between radio and receiver. Hold the binding button for 2 seconds to change to s.Bus mode. If LED light flashes rapidly two times and off for 1 second, then it is successfully changed to s.Bus output mode.
Quads with Futaba Compatible Receivers
Binding method for Futaba radios:
Compatible with Futaba radios support FASST.
1.Set the radio to FASST mode. Hold the binding button on receiver and then power it on. The red LED should flash rapidly. Release binding button the LED should flash red and green alternately, and then turns to solid green to indicate a successful binding. It may requires several trials to complete a binding. A solid red LED indicates the binding is not established.
2.Fail safe can be setup in the radio, and can be set after binding process. Hold the binding key for 2-3 seconds, the LED indicator of failsafe will flash rapidly and then turns to solid green, indicating it is in fail safe mode.
Package include:
1 x SPC Maker 90S Frame
1 x Ominibus F3 flight controller integrated with OSD module
1 x Frsky/DSMX/Flysky/futaba(optional receiver)
4 x SPC Maker 1104 7500KV brushless motor
1 x Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
4 x 50mm 5-blades propeller CW
4 x 50mm 5-blades propeller CCW
1 x 600TVL HD CMOS 1/4 inch camera
1 x 5.8G 25MW 48CH NTSC/PAL VTX
1 x 7.4V 500mah 30C lipo battery (comes without charger)
1 x WS2812 LED Board
https://www.gearbest.com/brushless-fpv-racer/pp_760156.html?wid=21
到着したらやること、写真とりつつ、確認、ばらして、半田、ワイヤリングの確認。
どやら、こいつ地雷品の様子。Lipo 容量と、バッテリー抜き７５ｇからすると、
25～30g は、ダイエットしないと、行けないのかな？
プロペラ５葉なのも、重たいから？
2S-450mA 35C / 70C :
SPC 80A : 75.0g /102.0g , Lipo 2S-500mA 30C : 27.0g、こいつは重さが一番の問題ですね。
Armor 67 : 41.3g / 63.0g , Lipo 2S-400mA 30C : 21.7g
Aurora 68: 47.5g / 69.2g , Lipo 2S-400mA 30C : 21.7gとすると、
SPC 80A - Armor67 ：39g
SPC 80A - Aurora68 ：32.8g
’
重すぎなら、↓に載せ替えても良いでしょうし、Aurora68 フレームでも、行けないかな？
先ずは、到着したら、重さ計って、ばらして、フレーム、カメラ、FC&ESC の重量計測かなぁ
ユーチューブの動画を見ていると、Lipoの放電能力が追い付いていない感じです。
⇒30C を、35C / 45C / 50C / 60C / 65C / 70Cやらに変えるか？？
TATTU の 2S は在庫が払底しているか、サイズが合わないか。
90mm Frame Kit - PURPLE 、24.0g
https://www.gearbest.com/racing-frame/pp_923887.html?wid=21
注文：Jan 07, 2018
出荷：Jan 08, 2018
到着：Jan 13, 2018
Kypom K6 7.4V 450mAh 35C/70C、あんまり考えていませんでしたが、重たいですね。
１号：31.62g
２号：31.29g
３号：31.30g
Makerfire Armor 67 付属 7.4V 400mAh 30C、２機分
１号：21.6g
２号：
SPC MAKER SPC 80A 付属 7.4V 500mAh 30C ×２本
１号：
２号：
ZOP 7.4V 1300mAh 20C ×３本、送信機用途で価格優先購入、5gも違うｗ
１号：57.09g
２号：62.08g
３号：60.73g
21.6g に対抗できるのは、22.0g で
Original FuriBee 7.4V 400mAh 35C 2S Lithium-ion Battery - YELLOW
https://www.gearbest.com/multi-rotor-parts/pp_590449.html?
23g弱で、
Eachine 2S 7.4V 400mAh 30C Lipo Battery for Aurora 68 RC Drone FPV Racing
https://www.banggood.com/Eachine-Aurora-68-Spare-Part-2S-7_4V-400mAh-30C-Lipo-Battery-p-1137422.html?rmmds=search&cur_warehouse=CN
Frame ：90mm Frame Kit
Reciver ：Banggood の格安品
FC ： 2S F3 , Flight controller size: 20 x 20mm, 16 x 16mm, 15 x 15mm
ESC ： 2S DSHOT 300 / 600 or FCにESC込みの奴
MOTOR ：SA1103 8000KV、2S/3S、テストで、1S で回るかやってみよう
Propeller：大量保有の、1535 でやってみて、ダメなら、2030 / 2035 で
Camera ：無し or AIO
Makerfire Armor 67 が、Jan 06,2018 出荷で、11日には到着しそう
上手くすれば、
SPC MAKER SPC 80A も、12日、13日には、到着か？
Gearbest は、可能な限り、Priority Line を選択しましょう。
EAGLEPOWER SA1103 8000KV Motor - 4PCS COLORMIX
https://www.gearbest.com/motor/pp_1199429.html?wid=21
EAGLEPOWER SA1103 Lite 8000KV Motor - 4PCS COLORMIX
https://www.gearbest.com/motor/pp_1199431.html?wid=21
SA1103 8000KV の在庫が無くて、SA1103 Lite 8000KV に、
SA1103 8000KV ：Jan 19.2018 以後の出荷
⇒Aliexpress でよければ、同価格帯のモーターは、
OCDAY BR1103 10000KV Brushless Motor Red for 50 80 100 Quadcopter Racing Drone
OCDAY RC Motor 4pcs 1102 BR1102 8000KV 1-3S Brushless Motor for 50-90mm Micro FPV Racing Drone Quadcopter
GoolRC Original RC Drone Motor 4pcs 1104 8700KV 2S Brushless Motor CW CCW for 80 90 100 Mini Micro FPV RC Racing Quadcopters
GoolRC 4pcs 1103 10000KV 2S Brushless Motor CW CCW for 80 90 100 Micro FPV Racing Quadcopter RC Motor In Airplanes Drone Parts
4pcs/lot 1104 7500KV 2-3S Brushless Motor Engine for iX2 90mm Q90 Mini FPV Racer Racing Drone Spare Parts Accessories
http://www.spcmaker.com/spc-80a-80mm-brushless-fpv-racing-drone-74v-purple-version-bnf-dsm2-receiver-frsky-receiver-futaba-receiver-flysky-receiver-four-options_p0016.html
Description
Description:
Brand name: SPC Maker
Product model: SPC 80A
Wheelbase: 80mm
Size: 116.5*116.5*55mm
Weight: 75g (without battery)
Flight weight: 102g(Include battery)
Motor: SPC Maker 1104 7500KV brushless motor
ESC: Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 50mm 4-blades propeller
Receiver: Receiver: Frsky/DSMX/Flysky/Futaba(optional)
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Flight controller: OSDOminibus F3 flight controller integrated with OSD module
OSD: Betaflight OSD
Firmware of flight controller: Betaflight_3.1.0_OMNIBUS
Flight time: 4-5minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 7.4V 500mah 30C lipo battery
Flight controller parameters:
Ominibus F3 flight controller integrated with OSD module.
1.Powered by MPU6000 sensor for quick response to acceleration, integrated with 5V/1A BEC and OSD module (This is 6DOF version, no barometer and compass).
(1) Designed for small size FPV quads with a frame smaller than 280mm, especially ideal for quadcopters smaller than 130mm to exhibits its advantages in small dimensions and multiple functions.
(2) It provides all the functions of F3 6DOF version, but weighs only 8 grams. The size is only 27*27mm. Mounting hole size is 20mm (2.5mm hole).
(3) Designed for quadcopter with LC filter. It supports CF and BF firmware (Omnibus F3)
(4) STM32F3CCT6 microprocessor, 256K memory, MPU6000 sensor, SPI port, faster processing speed.
(5) Supports 2-4S LiPo input.
(6) Built-in 5V 1A BEC.
(7) Supports popular receivers such as SBus, PPM, DSMX.
(8) Buzzer, programmable LED, voltage monitoring, HLHeli ESC.
2.4 in 1 BLheli_s ESC：
Specifications:
Input voltage: 2-4S LiPo and 2-4S HV LiPo
BEC Output: Not available
Constant current of a single ESC unit: 10A
Maximum current: 15A 5 second.
Dimensions: 27*27mm (main board)
31*31.5mm (including soldering pads and extruded part)
Weight: 6.3g
Firmware: BLHeli_s
Supports D-Shot, Oneshot, rotation directions.
Processor: SILABS EFM8BB21F16G
MOS FET: TPN2R703NL
Driver: new generation 3 in I MOS
Specification of Mini F3 flight controller tower:
Weight: 8g
Supported frames: smaller than 280mm
Constant current: 10A*4 (maximum current: 15A*4, 5s)
Camera parameters:
Frequency band: 5362-5945MH
Channel: 48
Modulation type: FM
Select channel: switch
Channel display: CH1-CH8 channel display with 8 LEDs, and A-F frequency group display with 6 LEDs
Transmit power: 13±1dBm
Frequency control: PLL
All harmonic: Max-50 dBm
Frequency stability: ±100KHz(Typ.)
Frequency precision: ±200KHz (Typ.)
Channel disk failure: 1dB
Antenna port: 50 Ω
Input format: NTSC / PAL
SENSOR: PAL: 720 × 540/NESC: 640 × 480 1/4 "
LENS ANGEL: H: 120 ° / V: 100 °
Baseband interface: P1, 27 * 2
Energy consumption: 200-215MA@5V DCIN
Supply voltage: 2.9-5, 5V
Operating temperature:-10℃ ~ + 60℃
Profile dimension: 14, 5 mm × 12, 2 mm + 14, 5 mm × 12 mm
Compatible:
1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D8 mode),and XJT (D8 Mode),DJT DFT DHT Transmitter.
3.Flysky Receiver Support FS-I6FS-I6X.FS-I6S.FS-TM8.FS-TM10.FS-I10 and other second-generation AFHDS 2A protocol remote control
4.Futaba Receiver Support TM7,TM8, TM10, TM14 T6EX-2.4G,7C-2.4G,T8FG,T10CG ,T12FG.T14SG.
Receiver Setup and Binding Methods
Quads with DSM Compatible Receivers
Binding method for Spektrum radios:
1.Push and hold gold button on top of flight controller.
2.Plug in battery.
3.Release button, light will flash quickly.
4.Hold radio away from machine.
5.Put radio in bind mode.
You are done!
Quads with FrSky Receivers
Binding methods for FrSky radios:
1.Select the D8 mode in X9D radio, and hold binding button of receiver at the time of powering it on. The LED should stay in solid. Then select “BIND” in radio. Binding is successful if the LED light of receiver goes off. Release binding button and power off receiver to exit binding mode. Receiver is ready to use after powered on.
2.For DJT and DFT modules, hold the button on module and power on radio, and the module is set in binding mode. Press and hold the binding button on receiver then power it on. Binding is completed if LED light goes off. Release binding button and restart receiver, and the system is ready for use.
3.For XJT module please select D8 mode by using the dip switch, and follow the above binding procedures.
Enable PPM output:
Short the solder pads of PPM on receiver board to enable PPM output. This can be used for flight controllers, wireless simulators, and wireless trainer radios.
Enable s.Bus mode:
Short the solder pads of s.Bus on receiver board to enable s.Bus output.
Failsafe setup:
Failsafe is assigned to channel 3 only, and cannot be defined by users. No matter what mix setup is used, please make sure throttle is assigned to channel 3.
Quads with FlySky Receivers
Binding method for FlySky radios:
Support radios with the second generation protocol (AFHDS 2A).
1.Enter the binding mode in the radio.
2.Hold the binding button on receiver, and power it on. Rapid flash of LED indicates the receiver is in binding mode. If binding is successful, the LED light will change to slow flash.
3.Exit binding mode of the radio. The LED light on receiver should become solid, indicating completion of binding.
Enable s.Bus mode:
Output modes can be switched in lieu of normal communication between radio and receiver. Hold the binding button for 2 seconds to change to s.Bus mode. If LED light flashes rapidly two times and off for 1 second, then it is successfully changed to s.Bus output mode.
Quads with Futaba Compatible Receivers
Binding method for Futaba radios:
Compatible with Futaba radios support FASST.
1.Set the radio to FASST mode. Hold the binding button on receiver and then power it on. The red LED should flash rapidly. Release binding button the LED should flash red and green alternately, and then turns to solid green to indicate a successful binding. It may requires several trials to complete a binding. A solid red LED indicates the binding is not established.
2.Fail safe can be setup in the radio, and can be set after binding process. Hold the binding key for 2-3 seconds, the LED indicator of failsafe will flash rapidly and then turns to solid green, indicating it is in fail safe mode.
Package include:
1 x SPC Maker 90S Frame
1 x Ominibus F3 flight controller integrated with OSD module
1 x Frsky/DSMX/Flysky/futaba(optional receiver)
4 x SPC Maker 1104 7500KV brushless motor
1 x Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
4 x 50mm 5-blades propeller CW
4 x 50mm 5-blades propeller CCW
1 x 600TVL HD CMOS 1/4 inch camera
1 x 5.8G 25MW 48CH NTSC/PAL VTX
1 x 7.4V 500mah 30C lipo battery (comes without charger)
1 x WS2812 LED Board
